H3C S5830V2 Irf Command Reference page 3

Preface
The H3C S5830V2 & S5820V2 documentation set includes 10 command references, which describe the
commands and command syntax options available for the H3C S5830V2 & S5820V2 Switch Series.
The IRF Command Reference describes IRF configuration commands for creating an IRF fabric. It covers
the commands for binding physical ports to an IRF port, configuring the member switch ID and priority,
and detecting and maintaining the IRF link.
This preface includes:
• Audience
Release-over-release command differences
•
Conventions
•
About the H3C S5830V2 & S5820V2 documentation set
•
Obtaining documentation
•
• Technical support
Documentation feedback
•
Audience
This documentation is intended for:
Network planners
•
• Field technical support and servicing engineers
Network administrators working with the S5830V2 & S5820V2 series
•
Release-over-release command differences
This documentation set is for Release 2108 and Release 2108P02. The following table describes the
command changes in Release 2108P02 over Release 2108:
Command reference
IRF
Added and modified commands in Release 2108P02
The irf link-delay command is modified as follows:
•
In Release 2108P2, the value range for the interval argument is 0
to 30000, and the default link down report delay is 4 seconds.
•
In Release 2108, the value range for the interval argument is 200
to 2000 and by default, no link down report delay is set.