H3C S5830V2 Irf Command Reference page 12

Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed MAD information. If this keyword is not specified, the command only displays
whether a MAD mechanism is enabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP enabled.
MAD ND enabled.
MAD LACP disabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
Excluded ports(can not be configured):
MAD ARP enabled interface:
Vlan-interface3
MAD ND enabled interface:
Vlan-interface3
MAD LACP disabled.
Table 5 Command output
Field
Current MAD status
Excluded
ports(configurable)
Excluded ports(can not be
configured)
Description
MAD status:
•
Detect—IRF fabric is integrated.
•
Recovery—IRF fabric is in Recovery state. When detecting a multi-active
collision, MAD places the IRF fabric with higher master ID in Recovery state
and shuts down all physical ports in the fabric but IRF physical ports and ports
that are configured to not shut down.
•
Detect to Recovery—State of the IRF fabric is transitioning from Detect to
Recovery, for example, as the result of an IRF split.
•
Recovery to Detect—State of the IRF fabric is transitioning from Recovery to
Detect.
Ports manually configured to not shut down when the IRF fabric transitions to the
Recovery state.
Ports by default set to not shut down when the IRF fabric transitions to the
Recovery state.
6