Connecting To Line Output Terminals - Yamaha YST-SW120 Owner's Manual

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
• Leave the main speakers connected to the amplifier.
• Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.
* For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers
with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this
case, select the method of connecting to the speaker terminals.
If using one unit
Left speaker
Amplifier
If using two units
Left speaker
This unit
OUTPUT INPUT2 PHASE
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
To AC outlet
Notes
• When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on
the rear panel of this unit. If connected, they will not produce sound.
• When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.
This unit
TO SPEAKERS
OUTPUT INPUT2 PHASE
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
FROM AMPLIFIER
To AC outlet
OUTPUT INPUT2 PHASE
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
This unit
OUTPUT INPUT2 PHASE
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
To AC outlet
OUTPUT INPUT2 PHASE
NOM REV
INPUT1
Pin plug cords
PRE OUT
OUTPUT INPUT2 PHASE
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
PRE OUT
Amplifier
Right speaker
Right speaker
Pin plug
cords
7