Connecting To Speaker Terminals Of Amplifier; Connections - Yamaha YST-SW120 Owner's Manual

• Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
• When making connections between this unit and other components, be sure all connections are made correctly and consistently,
that is to say L (left) to L, R (right) to R, "+" to "+" and "–" to "–".
• This unit can be connected to either the speaker terminals or the line output (pin jack) terminals of the amplifier. Choose one of
the ways shown below according to your audio system. Also, refer to the owner's manual for each component to be connected
to this unit.
CONNECTING TO SPEAKER TERMINALS OF THE AMPLIFIER
Disconnect your main speakers from the amplifier and connect them to this unit.
If using one unit
Right speaker
This unit
OUTPUT INPUT2
TO SPEAKERS
FROM AMPLIFIER
INPUT1
If using two units
Right speaker
This unit
OUTPUT INPUT2 PHASE
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
To AC outlet

CONNECTIONS

OUTPUT
TO SPEAKERS
FROM AMPLIFIER
PHASE
INPUT1
NOM REV
To AC outlet
OUTPUT INPUT2
TO SPEAKERS
FROM AMPLIFIER
INPUT1
INPUT2 PHASE
NOM REV
PHASE OUTPUT
TO SPEAKERS
NOM REV
FROM AMPLIFIER
INPUT1
Left speaker
Amplifier
Left speaker
INPUT2 PHASE
This unit
NOM REV
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT1
Amplifier
INPUT2 PHASE
NOM REV
To AC outlet
5