Transport - WATERKOTTE Basic Line Ai1 Geo Planning And Installation

Transport

5 Transport
12.11.2015
For easy transport the heat pump will be supplied in two packaging: heat pump
unit and housing.
 Exercise particular caution when transporting the units. The unit weighs 245 kg
depending on model. Do not use the packaging straps to carry the unit. Wear
protective gloves for unpacking and transporting the unit to prevent hand inju-
ries from cooling fins or other parts.
 Observe the transport information on the packaging.
 Observe the specified storage requirements.
 The units may not be stacked.

Machine may only be lifted by the proposed construction struts (left and right
side outside).
Figure 4: Installed machine (delivery status)
 Machine may only be transported in upright position

Ensure proper disposal of packaging materials. Packaging materials, such as
nails or other metal or wooden parts, may cause injuries.

Please also read chapter "General safety information".
16 / 60
Copyright  2013 by: WATERKOTTE GmbH. Subject to changes
Z21826