Product Description; Installation Instructions - 3M DBI SALA LAD-SAF X3 User Instructions

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA
to protect a worker in the event of a fall while climbing a fixed ladder or similar climbing structure. The Lad-Saf System is
comprised of the Top Bracket, a wire cable, the Cable Sleeve, the Cable Guide, the System Tag, and the Bottom Bracket. The
Top Bracket (A) is secured at the top of the ladder and anchors the Cable (B) in coordination with the Bottom Bracket (F), which
is secured at the bottom of the ladder. The Cable Sleeve (C) moves up and down the Cable with the user and attaches to the
frontal D-Ring of the user's harness. The Cable Guide (D) ensures that the Cable remains in place. The System Tag (E) displays
important safety information and should be placed at a point on or near the system. The System Tag is visible as Label "E" in
Figure 10.
Figure 2 illustrates components of the Lad-Saf X3 Cable Sleeve. The Cable Sleeve is comprised of the Upper Roller, the Rotating
Side Plate, the Handle, the Sleeve Body, the Locking Lever, the Lower Roller, the Carabiner, and the Locking Cam. The Upper
Roller (A) secures the Cable Sleeve to the Cable in coordination with the Lower Roller (F). The Rotating Side Plate (B) and
Handle (C) open to allow placement of the Cable Sleeve on the Cable. The Sleeve Body (D) makes up the main structure of the
Cable Sleeve. The Locking Lever (E) locks the Cable Sleeve and prevents unintentional opening of the device. The Locking Cam
(H) holds the Cable Sleeve in place when locked. The Carabiner (G) attaches to the front D-Ring of the user's harness.
See Table 1 for Component Specifications of the Lad-Saf X3 Vertical Cable Safety Sleeve and System.
System Specifications:
System Installation:
Lad-Saf Cable Sleeve:
Capacity:
Anchorage
Requirements:
Service Temperature: -40°F to 140°F (-40°C to 60°C)
Standards:
Cable Specifications:
Lad-Saf™ Ladder Safety System. The Lad-Saf Ladder Safety System is designed
®
Table 1 – Specifications

Installation Instructions

5908282
5903435
Item Number Activation Force
6160054 450 lbf (2.0 kN)
Each user must have a combined weight (clothing, tools, etc.) of 88 lb. to 310 lb. (40 kg to 140
kg). The Lad-Saf System may have up to four simultaneous users, but each Lad-Saf X3 Vertical
Cable Safety Sleeve may have only one user attached. For additional users, additional Cable
Sleeves must be used.
Number of Users Anchorage Strength
1
2 3,320 lbf (14.8 kN)
The Lad-Saf X3 Vertical Cable Safety Sleeve and System have been tested in accordance with the
standards identified on the front cover of these User Instructions.
The Lad-Saf X3 Cable Sleeve may only be used with a 3/8 in. (9.5 mm) diameter solid core cable.
Use with any other cable is prohibited and could result in serious injury or death.
Item Number Description
6104XXX / 3/8 in. (9.5 mm),
CE 6134XXX 1 x 7
6105XXX / 3/8 in. (9.5 mm),
CE 6135XXX 1 x 7
6106XXX / 3/8 in. (9.5 mm),
CE 6136XXX 7 x 19
6107XXX / 3/8 in. (9.5 mm),
CE 6137XXX 7 x 19
System Type
Vertical
Vertical
Max Deployment
Length
4.0 in. (102 mm)
Number of Users
2,700 lbf (12 kN)
Material
Galvanized Steel
Stainless Steel
Galvanized Steel
Stainless Steel
7
System Description
Lad-Saf Flexible Cable Safety
System
Lad-Saf Flexible Cable Safety
System with Swivel D-Ring
Minimum Breaking
Strength Weight
3,600 lbf (16 kN)
(1.0 kg)
Anchorage Strength
3 3,940 lbf (17.5 kN)
4 4,560 lbf (20.3 kN)
Minimum
Breaking Strength Weight
15,400 lbf 0.27 lb. / ft.
(68.4 kN) (0.41 kg / m)
18,000 lbf 0.27 lb. / ft.
(80 kN) (0.41 kg / m)
14,400 lbf 0.27 lb. / ft.
(64 kN) (0.41 kg / m)
12,000 lbf 0.27 lb. / ft.
(53.3 kN) (0.41 kg / m)
2.1 lb.