Adjusting The Image - Yamaha DPX-1100 Owner's Manual

Select an image for projection
Carry out the following adjustments to obtain optimal projection conditions.
N Using the test pattern to adjust the projection image – PATT button
The DPX-1100 is equipped with three test patterns, the crosshatch pattern necessary for focus and keystone adjustment, and the grayscale
and color bar patterns necessary for adjusting image quality.
AUTO
V. POS ZOOM FOCUS
IRIS SETTING PATT
ESCAPE MENU
STANDBY/ON
PATTERN button
ESCAPE MENU
PATTERN
ASPECT
INPUT
LAMP COVER TEMP FAN
N Adjusting the vertical position – V.POS button
If the center of the screen is not in line with the center of the lens of the DPX-1100, use the V.POS button to adjust the position of the image
up or down. You can adjust the image to a maximum of half of the height of the projection screen.
AUTO
V.POS
V. POS ZOOM FOCUS
button
IRIS SETTING PATT
ESCAPE MENU
STANDBY/ON
ESCAPE button
ESCAPE MENU
PATTERN
ASPECT INPUT
LAMP COVER TEMP FAN
20

Adjusting the image

1. Press the PATT button on the
remote control, or the PATTERN
button on the main unit.
2. Press the + or - buttons to select
PATT
the necessary pattern.
button
3. To exit from the test display,
press the PATT or PATTERN
buttons.
SETTING
1. Press the V.POS button on the
remote control, or press the
SETTING button on the main unit
repeatedly to select [Lens Shift]
from the display menu.
2. Press the h or g button to move
the projected image to a suitable
place.
3. To exit from the adjustment
SETTING
mode, press the V.POS or
button
ESCAPE buttons.
SETTING
Crosshatch pattern
Grayscale pattern
Color bar pattern
Lens Shift