Block Diagram
INPUT
Mounting the MSP10STUDIO on the wall
You can install the MSP10STUDIO on the wall using an optional Yamaha wall bracket BWS251-300. For
more information on how to install it, refer to the instructions that come with the wall bracket. For the angle
and position of installation, refer to the figure below.
The wall should be strong enough to support the speaker and equivalent to a sheet of plywood with a
thickness of 18 mm (11/16 inches) or more. Use appropriate tools for installation.
Correct installation
• Recommend for new constructions.
• Ask an installation specialist for instruction.
• Some installation parts may deteriorate due to friction or corrosion over a long period of time. For safety,
check these parts and condition regularly.
HPF
SENSITIVITY
LOW CUT
EQ
+1.5
0
–1.5
0
–3
–1.5
LOW
HIGH
TRIM
Incorrect installation
HPF
LPF
7