Thank you for purchasing the Yamaha MSP10STUDIO powered monitor speaker system. The MSP10STUDIO features a compact bass reﬂex cabinet, with a 20 cm two-way cone speaker and a 2.5 cm titanium dome speaker. This powered bi-ampliﬁer speaker system faithfully reproduces sound and can be used for a wide range of applications, from personal home recordings to serious professional use.
N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. * This applies only to products distributed by YAMAHA KEMBLE MUSIC (U.K.) LTD.
(The factory default setting is “MIN.”) INPUT jack This is an XLR-type balanced input jack. POWER switch This switch turns the power to the MSP10STUDIO on and off. When you turn this switch on, the power/clip indicator lights up green.
Speciﬁcations and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or speciﬁcations at any time without prior notice. Since speciﬁcations, equipment or options may not be the same in every locale, please check with your Yamaha dealer. For European Model Purchaser/User Information speciﬁed in EN55103-1 and EN55103-2.
Mounting the MSP10STUDIO on the wall You can install the MSP10STUDIO on the wall using an optional Yamaha wall bracket BWS251-300. For more information on how to install it, refer to the instructions that come with the wall bracket. For the angle and position of installation, refer to the ﬁgure below.