Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for d&b audiotechnik Z5160
Summary of Contents for d&b audiotechnik Z5160
- Page 1 Z5160 Load adapter Mounting instructions (1.0E)
- Page 2 Additional informations Symbols on the equipment Please refer to the information in the operating manual. General Information Z5160 Load adapter Mounting instructions Version 1.0E, 10/2004, D2971.E.01 © by d&b audiotechnik AG 2004; all rights reserved. The information contained in this manual has been carefully checked for accuracy, at the time of going to press, however no guarantee is given with respect to the correctness.
- Page 3 7.1. Test recommendations................6 8. Rigging example....................6 Product description The Z5160 Load adapter is intended for the use together with Z5159 Flying frame for arrays of Q loudspeakers to be suspended from a single flying point. The load adapter is supplied with one 2t Shackle and two locking pins, 12 mm (B2212) which are fixed to the adapter with a steel wire.
- Page 4 Load safety information WARNING! The maximum permitted working load limit (WLL) of the Z5160 Load adapter is 500 kg/1100 lb in terms of using the shackle. Using the Z5147 Rota Clamp the maximum permitted working load limit (WLL) is 250 kg/550 lb The Load adapter must only be moved beyound the rear edge of the bar of the flying frame while the “1/1 hole”...
- Page 5 The other two possible holes (20+1/2 - Fig. 10 and 20+3/4 - Fig. 11) are adjusted the same way as decribed in example 2. Fig. 10: Hole 20 + 1/2 Fig. 11: Hole 20 + 3/4 Z5160 Mounting instructions (1.0E) Page 5 of 6...
- Page 6 Functional inspection of the release mechanism for proper function. Rigging example Fig. 12: Examplea Q array consisting of: Z5159 Flying frame, Z5160 Load adapter, Z5147 Rota Clamp used as lifting device d&b audiotechnik AG, Eugen-Adolff-Str. 134, D-71522 Backnang, Germany, Phone +49-7191-9669-0, Fax +49-7191-95 00 00...
Need help?
Do you have a question about the Z5160 and is the answer not in the manual?
Questions and answers