Table of Contents
Advertisement
Figure 4 Appearance of the power supply after installation
IMPORTANT:
To avoid damaging or bending the terminals of the power supply,
•
if the insertion direction is incorrect during the installation, you
must pull the power supply out, adjust the direction, and insert it
again.
To remove the filler panel (if any) from the power supply slot on
•
the device, insert a flat-blade screwdriver through the handle and
pull the filler panel outward along the guide rails, as shown
in
Figure
Keep the filler panel and the packaging box and packaging bag
•
of the power supply for future use.
5.
8
Advertisement
Table of Contents
