Philips sonicare DiamondClean 9000 Series Manual page 45

ENGLISH
2 Place the charging stand or the charging glass on the charging
base.
3 Place the handle on the charging stand or in the charging glass.
4 The charger will charge your toothbrush until it is fully charged.
The handle is charging when the battery indication is blinking
white. When the handle is fully charged, the battery indication
illuminates white for 30 seconds and then turns off.
Note: Your handle comes pre-charged for first use. After first use,
charge for at least 24 hours.
Charging with the travel case*
*Note: The charging travel case may not be included depending
on the model purchased.
1 Take the USB cable from the bottom of the charging travel case.
2 Connect the charging travel case to 5V DC input power to
any USB source.
44