Air Line Connection - Launch TLT440 Installation Manual

LAUNCH

5.2.8 Air line connection

l Locking latches require 100 psi. min to 120 psi. max
air pressure. A filter/regulator/lubricator must be
installed on air supply at lift. Failure to do so will void
the warranty.
l Route the air lines based on Fig.15 and check for air
FRL Unit
Air Supply Hose
Air Control Valve
Bracket
RL Column
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
FL Column
Plastic Tube
Left Runway
Air Hose
Air Connector
T Fitting
Rear Cross Tube
Fig.15
440(440W) 455(455W) Installation Manual
leaks by depressing air valve. Actuate air control valve
and check latch operation on all four corners. The
locking latches should pull in beyond cross tube ends
to clear the latch plate.
T Fitting FR Column
Air Connector
Recoil Hose
T Fitting
To Rolling Jack Pump
Right Runway
RR Column
15
Front Cross Tube