Setting Song-Related Parameters - Song Settings - Yamaha PortaTone PSR-A1000 Owner's Manual

Setting Song-related Parameters — Song Settings
The explanations here apply to step #3 of the procedure on page 118.
Determines the MIDI channel assigned
to the [TRACK2] button.
Determines the MIDI channel assigned
to the [TRACK1] button.
Making Global and Other Important Settings — Function
Allows you to play back all songs
from the same folder continuously.
Turns Quick Start on/off (see note).
A
B
C
D
E
1 2 3 4 5
When set to "ON," this
automatically sets the proper
Track 1 and Track 2 channels.
Normally, this should be set to
"ON."
F
G
H
I
J
6 7 8
Determines whether the Phrase
Mark Repeat function for the song
is on or off. When this is on, you
can repeatedly play back a
specified phrase (selection of
measures) of the song. The
method for setting a phrase mark
is the same as that in the SONG
POSITION display (page 69).
Quick Start
On some commercially avail-
able song data, certain set-
tings related to the song
(such as voice selection, vol-
ume, etc.) are recorded to
the first measure, before the
actual note data. When
Quick Start is set to "ON,"
the PSR-A1000 reads all ini-
tial non-note data of the
song at the highest possible
speed, then automatically
slows down to the appropri-
ate tempo at the first note.
This allows you to start play-
back as quickly as possible,
with a minimum pause for
reading of data.
n
Channel
Refers to the MIDI channel
(page 141). The channels
are assigned as follows:
Song
1 - 16
Accompaniment Style
9 - 16
n
Phrase Mark
This data specifies a certain
location in the song data.
PSR-A1000
121