Advertisement
ET5200PpH-DR
Hardened IP CCTV Self-Configured 5-port 10/100/1000Base-T with 4-port PoE+ Ethernet Switch
Left Side view
Installation
Din-rail Installation
ET5200PpH-DR can be installed on a DIN rail. Installation steps are as follows:
Top
Hook
1. Put the switch close to the
DIN rail track. Lock the top
hook of the DIN rail clip on the
upper side of the track.
Removal:
1. Pull down the locking slide and pull out the lower part of the DIN rail clip until it leaves the track.
2. Lift up the top hook of the clip until the switch separates from the track.
Locking
Slide
2. Press the switch until
the locking slide moves
downward and a "click"
sound is heard.
2
3. The locking slide is then
moved back to its original
position. The switch is securely
locked onto the track.
V1.1
Advertisement
