Table of Contents
Advertisement
Cleaning may alleviate problems; however, replacement is recommended as frequent
attention may be required to calibrate and maintain a marginal electrode.
Replacing Fuses
If a fuse has failed, follow these instructions:
1. Shut down the system.
2. Disconnect panel from the electrical supply.
3. Remove cover from fuse block (no tools required).
4. Note which direction the nub on the fuse is facing, and then remove the fuse using a
medium-sized flat head screwdriver.
5. Install a new fuse; be sure to align the nub in the same direction as the fuse that was
just removed.
6. Reinstall fuse cover.
7. Reconnect electrical supply.
8. Restart the system if returning it to service.
Spare Parts List
Tag No.
HTR-1
FU-1
FU-2
TIC-1
Sentry DCCP Reboiler
Qty.
Description
Heater, 120V, CSA Version
1
Heater, 240V
1
Fuse, Controller, 1/2A
Fuse, Heater 120V, 15A
1
Fuse, Heater 240V, 8A
1
Controller, Temperature
Part No.
4-05935A
4-05935B
4-01235F
4-01235E
4-01235Z
6-03012N
13
Advertisement
Table of Contents
