WilTec JH95A Operation Manual page 5

Fields of Application and Features
Usage
1. For demolition and road work.
2. For breaking (corner) stones (for example for track work).
3. For excavating telephone lines.
4. For breaking frozen surfaces.
Features
1. Comfortable handling and ideal control due to the handle minimising vibrations.
2. The adjustable power setting regulates the speed and allows for the power output to be
matched to the task at hand.
Preparation
Assembly
1. Lubricate the chisel you wish to use.
2. Unlock the chisel retainer by pulling the locking bolt into the direction of the arrow and insert
the chisel into the retainer. Make sure the chisel has been inserted correctly and rotate it 180°
in order to fix it in place. After that close the retainer with the help of the locking bolt again.
3. Fill the fuel tank with two-stroke mixture and press the primer in order to supply the system
with fuel before then starting the motor.
Fuel
In order to guarantee a flawless mode of operation and extend the jackhammer's service life, it is
advised to use a two-stroke mixture with the following mixing ratio:
Condition
Within the first 20 hours of working time
After 20 hours of working time
1. Do under no circumstances use pure petrol to fuel the jackhammer.
2. Only fuel or refuel the device in well ventilated places.
3. Do not overfill the tank and do not leave any fuel residue in the outlet. In case of fuel being
spilled, remove it appropriately or wait for it to evaporate before starting the engine.
4. Always make sure to properly close the fuel tank cap properly after fuelling/refuelling.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
October 2019 Version 2
Petrol: Machine Oil
20:1
25:1
Seite 5