Powering On The Switch - H3C S5830 Series Installation Manual

Figure 45 Setting terminal emulation in Switch Properties dialog box

Powering on the switch

Before powering on the switch, verify that:
The power cord is properly connected.
•
• The input power voltage meets the requirement of the switch.
The console cable is properly connected, the terminal or PC used for configuration has started, and
•
the configuration parameters have been set.
Power on the switch. During the startup process, you can access the BootWare menu to perform tasks
such as software upgrade and file management. The BootWare menu output and options differ with
software versions. For more information about BootWare menu options, see the software-matching
release notes for the device.
After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see H3C S5830 Switch Series
Configuration Guides and H3C S5830 Switch Series Command References.
33