Midi Data Format - Yamaha P50-m Owner's Manual

MIDI Data Format

Status
Note No.
Velocity
Velocity is not received.
Not received when the Part Parameter setting Rcv NOTE
MESSAGE = OFF.
Status
Note No.
Velocity
Velocity is received only for Note On.
Not received when the Part Parameter setting Rcv NOTE
MESSAGE = OFF.
Status
Note No.
Value
With the default settings, has no function.
Polyphonic Aftertouch is not received when the Part
Parameter setting Rcv POLYPHONIC AFTER TOUCH =
OFF.
The effect will apply only to the range of note numbers
36~97.
Status
Control No.
The range of possible values for
"c" is described in section 1.4.1
and following.
Control Value v=0~127
Control Changes are not received when the Part Parameter
setting Rcv CONTROL CHANGE = OFF.
Cntrl No. parameter
0 Bank Select MSB
32 Bank Select LSB
Bank Select messages are not received when PROGRAM
CHANGE TABLE = OFF, and Rcv BANK SELECT = OFF.
Bank Select processing is suspended until a Program
Change message is received.
Cntrl No. parameter
1 Modulation
Modulation is not received if the Part Parameter setting Rcv
MODULATION = OFF.
Cntrl No. parameter
5 Portamento Time
1.4.9 When Portamento = ON, this adjusts the speed of the
pitch change.
A value of 0 is the shortest portamento time, and 127 is the
longest portamento time.
n=channel number
k=0 (C-2)~127 (G8)
v=0~127
n= channel number
k=0 (C-2)~127 (G8)
v=0: Note off,
v=1~127: Note on
n= channel number
k=0 (C-2)~127 (G8)
v=0~127
n= channel number
Data Range
0:Normal, 1~127:Silent
0~127
Data Range
0~127
Data Range
0~127
SOUND LISTS & MIDI DATA
Cntrl No. parameter
6 Data Entry MSB
38 Data Entry LSB
Used to set the value of the parameter specified by RPN and
NRPN.
Cntrl No. parameter
7 Main Volume
Volume is not received when the Part Parameter setting Rcv
VOLUME = OFF.
Cntrl No. parameter
10 Pan
0 is left, 127 is right.
Pan is not received when the Part Parameter setting Rcv
PAN = OFF.
Cntrl No. parameter
11 Expression
Expression is not received when the Part Parameter setting
Rcv EXPRESSION = OFF.
Cntrl No. parameter
64 Hold1
Hold1 is not received when the Part Parameter setting Rcv
HOLD1 = OFF.
Cntrl No. parameter
65 Portamento
Portamento is not received when the Part Parameter setting
Rcv PORTAMENTO = OFF.
Cntrl No. parameter
66 Sostenuto
Sostenuto is not received when the Part Parameter setting
Rcv SOSTENUTO = OFF.
Cntrl No. parameter
67 Soft Pedal
Soft Pedal is not received when the Part Parameter setting
Rcv SOFT PEDAL= OFF.
Cntrl No. parameter
71 Harmonic Content 0~127 (0:-64, 64:+0, 127:+63)
This parameter adjusts the resonance specified by the voice.
Since it is a relative change parameter, it produces a boost or
cut relative to a mid-point of 64. Higher values will produce a
more distinctive sound.
Depending on the voice, the effective range of this parameter
may be narrower than the range that can be set.
Data Range
0~127
0~127
Data Range
0~127
Data Range
0~127
Data Range
0~127
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
0~127 (0-63:off, 64-127:on)
Data Range
33