Recycling The Used Refrigerating Devices; Proper Exploitation Rules Of Refrigeration Device - Whirlpool ADN 213 Operating Instructions Manual

has the condenser been cleaned properly?
are the ventilators of condenser and cooler working?
refrigeration device is working loudly
is the device leveled?
are the products inside the device not vibrating, if yes, they should be placed properly?
the refrigeration device covers with ice excessively
have the outflow lines been cleaned?
has the device not been loaded with excessive amount of damp, steaming products?
has the door not been open for a prolonged time?
do the door gaskets adhere to the trunk properly?

11. RECYCLING THE USED REFRIGERATING DEVICES

Care for the environment!
The user is obliged to return the used device to the proper storage depot. The devices withdrawn from
usage cannot be placed together with other household waste.
Cardboard packaging should be recycled.
Polyethylene (PE) sacks should be placed in the container for plastics.
Proper proceeding with used up refrigeration equipment contributes to avoidance of harmful
consequences to people's health and natural environment, resulting from presence of dangerous
components, and proper storage and processing of this equipment.

12. PROPER EXPLOITATION RULES OF REFRIGERATION DEVICE

1. Connect the device only do the zeroed mains outlet.
2. Place the device in a proper distance from the wall, described in operating instruction.
3. Do not cover intake and outlet holes in aggregate chamber, serving the circulation of air cooling the
condenser.
4. Provide operating refrigeration device with the environment temperature in the following ranges:
+16 to +25°C device for exposure (window-paned)
+16 to +32°C device for storage (cases, containers), in tropical version +16 to +43°C
5. Place the device in a dry and drafty room (recommended relative humidity 60%).
6. Periodically, make the condensate outflow channels permeable by cleaning the trays and troughs.
7. In devices with no automatic defrosting, do a manual defrosting when the layer of frost on the
evaporator exceeds 0.5 cm.
8. You should unconditionally dust the condenser fins in the aggregate chamber to provide free airflow, at
least every two months.
9. Do not exceed chamber load capacity of refrigeration device given in operating instruction.
10. Observe the other suggestions and recommendations given in operating instruction.
ATTENTION!
Non-observance of the suggestions given above may result in non-reaching the assumed parameters,
like desired temperature, bedewing of windows or external housing, water overflow from drip tray, and
even compressor damage. These failures cannot be claimed by virtue of warranty.
25