Table of Contents
Advertisement
using your iron
Spraying
The spray function will only operate when there is water in the water tank.
1.
The water spray can be used to help iron heavy fabrics or difficult areas (collars,
pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics
which cannot be steam ironed.
2.
Simply press the button as required to produce a spray of water. If the spray is being
used for the first time, or if the iron has been standing for some time, you may need
to press the spray button a few times before it works correctly.
Dry Tank Alert
Your iron will warn you if the water tank requires filling. The dry tank icon (
on the display when the water tank requires filling. Follow the instructions on page 5 to
refill the water tank.
Anti-Drip Function
When the temperature of your iron is insufficient to create steam, the supply of water is
cut off automatically to avoid any drips from the soleplate.
Anti-Scale Filter
Your iron is fitted with a permanent anti-scale filter. This filter is fixed and cannot be
removed for cleaning.
The filter is designed to reduce the build-up of limescale inside your iron. Limescale
occurs during steam ironing due to water hardness.
Water hardness varies from one area to another. The effectiveness of the filter will
depend on how 'hard' your water is.
Safety Auto Shut-off Feature
ALWAYS turn the iron off and disconnect from the power source after use.
NEVER leave the iron unattended with the Auto Shut-off function in operation.
The iron will shut off if it has not been used for 10 minutes when resting on its heel, or
after 30 seconds with the iron resting on its soleplate. The AUTO OFF cursor on the
display will start to flash and your iron will sound a series of beeps. This sequence will be
repeated whilst the iron is in auto shut-off mode. To restart the iron, gently move it until
the AUTO OFF cursor turns off.
10
) will appear
Advertisement
Table of Contents
