Table of Contents
Advertisement
Never use fabric conditioner, starches or any other chemicals or additives.
1.
Ensure the iron is switched off and unplugged from the mains supply socket.
2.
Set the steam control to the no steam position (
3.
Place the iron on its heel on a flat, stable, dry, heat resistant and level surface and
open the water tank inlet cover.
4.
Using the supplied measuring cup, fill the water tank with ordinary tap water. To avoid
air locks, tilt the iron slightly while filling it.
5.
Don't fill the iron above the water level indicator MAX marking. Check the water level
by standing the iron on its heel.
6.
When the iron is filled close the water tank inlet cover.
filling your iron
).
Advertisement
Table of Contents
