Table of Contents
Advertisement
controls and display
The backlit temperature control display allows you to select from seven fabric types by
using the + or – buttons.
For example, to select the COTTON setting:
1.
Press the increase temperature (+) button until COTTON is selected. The iron will
beep each time the button is pressed.
2.
Your iron will begin to heat up and the temperature indicator icon ( ) will flash.
3.
When your iron beeps once and the temperature indicator icon stops flashing your
iron is at the correct temperature and you can begin ironing.
4.
To decrease the temperature of your iron (e.g from COTTON to SILK, press the
decrease temperature button (-) until SILK is selected.
Note: When the fabric type is changed from a type that requires a high temperature
to one that requires a lower temperature setting (e.g. from COTTON to SILK), the
temperature indicator icon will start to flash. This indicates that your iron is cooling
down to the new setting. To ensure that your iron has cooled to the selected
temperature and is not too hot, wait until your iron beeps once and the temperature
indicator icon stops flashing before ironing.
Advertisement
Table of Contents
