Use Tempo; Click Mode; Tg (Tone Generator) Group; Equalizer (Eq) - Yamaha DTXPRESS Owner's Manual

Utility Mode

3-7. Use Tempo

This function sets the tempo of a song to either change each time
to its default tempo, or remain unchanged at the currently set tempo
when the song is switched.
UT SEQ SETUP

Use Tempo=

q Use Tempo
song: Changes the tempo of the song to its default tempo when
the song is switched.
global: The tempo remains unchanged at the currently set tempo
when the song is switched.

3-8. Click Mode

This sets whether or not the click voice will automatically sound
during song playback.
UT SEQ SETUP
ClickMode=manual
q ClickMode (Click Mode)
manual: The [CLICK] button will control on/off operation of the
click sound.
sync: The click will sound during song playback, but will not
sound when the song is stopped. The [CLICK] button
can also be used to control on/off operation of the click
sound.
58
q
song
q

4. TG (Tone Generator) Group

This sub-mode contains settings for the DTXPRESS' tone genera-
tor. This group is divided into the following 4 pages.

4-1. Equalizer (EQ) ................................................. 58

4-2. Tuning .............................................................. 58

4-3. Volume ............................................................ 58

4-4. Reverb Bypass ................................................ 59

4-1. Equalizer (EQ)

Sets the Master Equalizer (2-band shelving type).
UT TG MASTER
EQ Lo=+ 6iHi=+ 0
q
q EQ Lo (Low Gain)
[Range] +0 to +12 (dB)
w EQ Hi (High Gain)
[Range] +0 to +12 (dB)

4-2. Tuning

This function sets the master tuning of the tone generator.
UT TG MASTER
Tune C= 0 F=
q
q Tune C (Tune Coarse)
[Range] –24 to 0 to +24
Tuning can be set in increments of a half step.
w Tune F (Tune Fine)
[Range] –64 to 0 to +63
Tuning can be set in increments of about 1.17 cents.

4-3. Volume

This function sets the overall volume level of the tone generator.
UT TG MASTER
Volume=
q Volume
[Range] 0-127
w
0
w
q
110