The Dtxpress Quick Guide (Basic Functions List) - Yamaha DTXPRESS Owner's Manual

The DTXPRESS Quick Guide (Basic Functions List)

Play the DTXPRESS along
with your favorite CD or MD!
(Connect the line out from a
CD or MD player here.)
Connect a pair of head-
phones here to monitor the
DTXPRESS!
Press the knob to switch the power ON!
Rotate the knob to adjust the overall vol-
ume (transmitted to the OUTPUT jack).
Also controls the headphone volume.
Select the drum kit, song, and set the song
tempo and metronome.
m Enters the Drum Kit Play mode.
Set the basic settings and settings for MIDI
and the sequencer of the DTXPRESS.
m Enters the Utility mode
Starts/stops the metronome!
Start/stop playback of the song!
Hold the [SHIFT] button and press this
button to start recording.
Save settings to the DTXPRESS' memory.
Set a secondary function for the buttons and
knobs.
14
Control the volume of a CD
or MD player with this knob.
Hold the [SHIFT] button and press this
button to mute the song's drum part.
Controls the volume of the metronome's
click voice!
Hold the [SHIFT] button and rotate this knob
to change the volume of the bass drum!
Controls the volume of the song accompaniment!
Hold the [SHIFT] button and rotate this knob to
change the volume of the snare drum!
Sets the pad's sensitivity and dynamic
range.
m Enters the Trigger Setup Edit mode.
Change the instrument voice for each pad
in the drum kit or add reverb.
m Enters the Drum Kit Voice Edit
mode.
Edit the songs you create.
m Enters the Song Job mode.
Hold the [SHIFT] button and press this but-
ton to display the Tempo setting display!
Navigate through the setting display's
pages.
Moves the cursor (flashing character).
Changes the value of the parameter
selected with the cursor.
Hold the [SHIFT] button and press this but-
ton to display the Groove Check display!