Usb Midi Driver - Yamaha DM 2000 Owner's Manual

USB MIDI Driver

To operate the DM2000 from your computer via USB, you'll need to install the USB MIDI
driver. This software transfers MIDI data back and forth between Studio Manager and the
DM2000 via USB.
For Windows 98/Me, see the next section.
For Windows 2000, see page 6.
For Windows XP, see page 7.
Installing on a Windows 98/Me system
Turn on your PC and start Windows.
1
Insert the included CD-ROM disc into your CD-ROM or DVD-ROM drive.
2
3 Turn off the DM2000 and use a USB cable to connect the USB port of the
computer (or the USB hub) to the TO HOST USB port of the DM2000.
Turn on the DM2000.
4
The Add New Hardware Wizard window appears. If it does not appear, click Add New
Hardware in the Control Panel.
Note: For Windows Me, select "Automatic search for a better driver (Recommended)" and click
Next. When the driver is located and installed, proceed to Step 9. If the driver cannot be located,
select "Specify the location of the driver (Advanced)" and specify the CD-ROM drive's root
directory (e.g., D:\) to install the driver.
Windows 98
Software Installation for Windows
Computer
Sequence
Software
USB cable
Driver
Windows Me
DM2000
Studio Manager—Owner's Manual
4