ecofort ecoQ 20L Instruction Manual page 36

Operate:
• Connect the device only to 220-240 V / 50 Hz sockets
• Always unplug the unit from the mains and wait for at least one hour before carrying out any
maintenance, transport or cleaning of the unit.
• Always switch the unit off and pull the plug out of the socket, if you are not using the unit, before
you clean the unit, if a fault occurs and in the event of a storm.
Do not use this unit with temperatures lower than 5°C, to prevent the possibility of a heavily ice up
evaporating coil.
36
IMPORTANT!