Entering Your Name And Language Preference - Owner; Restoring The Factory-Programmed Settings Of The Cvp-210/208 - System Reset - Yamaha Clavinova CVP-208 Owner's Manual

Making Global and Other Important Settings — Function
Entering Your Name and Language Preference — Owner
Determines the
language used
for the display
messages.
Once you
change this
setting, all
messages will
be shown in the
selected
language.
1
Restoring the Factory-programmed Settings of the CVP-210/208 —
System Reset
This operation lets you restore the CVP-210/208 to its original factory settings. These settings include System Setup,
MIDI Setup, User Effect, Music Finder, and Files & Folders.
Restores the System Setup parameters to the
original factory settings. You can also restore
only the System Setup settings by
simultaneously holding down the highest key
on the keyboard (C7) and turning on the power.
Restores the MIDI
templates to the original
factory settings.
Restores the User Effects
(page 127) to the original
factory settings.
Restores the Music Finder
data to the original factory
settings.
Deletes all files and folders
stored in the User page.
Executes the Factory Reset operation
for all items checkmarked above.
154 CVP-210/208
2 3 4 5 6 7
A
B
C
D
E
1 2 3
F
Press this button to
enter an Owner
G
name(page 17; for
H instructions on
naming see
I
page 49). This name
is automatically
J
shown when you
turn the power on.
Calls up the MAIN PICTURE
display, from which you can
select the background of the
MAIN display.
8
4 5 6 7 8
These call up the corresponding Open/
Save displays. These let you store the
corresponding data as files to disk, for
future recall. Pressing each of these
buttons calls up the corresponding
Open/Save display, from which you can
select the corresponding PRESET
page. From this PRESET page, you
can save the relevant data.
When selecting background data from a
floppy disk:
• Only bitmap files (.BMP) can be used
for the background of the MAIN dis-
play. Make sure to use images no
larger than 640 x 480 pixels. Smaller
images are automatically copied and
tiled in the display.
• The selected background will not be
displayed when the power is turned
on again unless the same disk con-
taining the data has been inserted
into the drive.
• The background may take some time
to appear. If you want to reduce this
time, save the background to the
USER page of the MAIN PICTURE
display.
n
Selecting a different language here may
cause the following problems.
• Some characters of the file names
you entered may be garbled.
• Files may not be accessible.
Restoring the original language solves
the above problems.
Reading the files on the computer with a
different language system may cause
similar problems to those above.
The functions and settings
below do not apply to the Fac-
tory Reset operation. However,
you can restore these to their
original settings by calling up
the preset System Setup files,
using the Open/Save System
Files function.
F
Language
Owner Name
G
LDC Contrast
H
LCD Brightness
Video Out settings (NTSC/PAL)
I
Screen Content
J
All Music Finder records can be
stored together as a single file.
When calling up a stored file, a
message appears prompting
you to replace or append the
records as desired.
Replace:
All Music Finder records cur-
rently in the instrument are
deleted and replaced with the
records of the selected file.
Append:
The records called up are
added to the vacant record
numbers.