Selecting Files And Folders - Yamaha Clavinova CVP-208 Owner's Manual

Basic Operations — Organizing Your Data

Selecting Files and Folders

Select a file shown in the display. In this example, we'll select a voice file.
First, press the VOICE [PIANO & HARPSI] button to call up the display containing the files.
This display ("Open/Save" display) is typical of those used to call up and store files (voice files).
The CVP-210/208 already contains a variety of voices in the PRESET section. You can store your own original voices
created with the Sound Creator function to the USER or FLOPPY DISK section.
A
B
C
D
E
1
▲
2
Use the [1 ] - [7
turn the pages.
When the amount of pages exceeds seven,
the bottom of the display changes as shown
below.
Press Prev.(previous)
Press the [EXIT] button to go back to the MAIN display.
E
You can go back to the previous display by pressing the [EXIT] button.
ND
Exiting from small pop-up windows
You can also exit from small pop-up
windows (such as in the illustration
below) by pressing the [EXIT] button.
44 CVP-210/208
2 3 4 5 6 7
▲
] buttons to
Press Next
BACK NEXT
VOICE PART
F
ON OFF
G LAYER
H LEFT
ENTER
I
J
DATA
ENTRY
3
Select the file/folder.
8
There are two ways to select the file/
folder:
• Press the [A] - [J] button.
Press the letter button
corresponding to the file/folder you
wish to call up. (In the example
display shown above, the voice files
are shown.)
• Use the [DATA ENTRY] dial and
the [ENTER] button.
When you turn the [DATA ENTRY]
dial, the highlight moves among the
available files/folders. Highlight the
desired file or folder (voice files are
shown in the example above) and
press the [ENTER] button to call up
the selected item.
1
Select "PRESET," "USER," or
"FLOPPY DISK" by using the
[BACK][NEXT] button.
Selecting a different lan-
guage in the "LANGUAGE"
display (page 53, 154) may
cause the following prob-
lems.
• Some characters of the
file names you entered
may be garbled.
• Files may not be accessi-
ble.
Restoring the original lan-
guage solves the above
problems.
Reading the files on the
computer with a different
language system may cause
similar problems to those
above.
Double-clicking the
appropriate [A] -[J] button
calls up the corresponding
file and returns to the MAIN
display.
Highlighting the desired file
and double-clicking the
[ENTER] button calls up the
corresponding file and
returns to the MAIN display.