Yamaha Clavinova CVP-202 Owner's Manual page 82

Creating Your Own Styles
V Set the value or depth of the selected parameter.
The
LCD button sets the amount or depth for the parameter selected in
step 2.
When
and the
the preset volume of the source style). When the
parameter is selected, the
to . When
range from
B Repeat as necessary.
Repeat the preceding steps to set other parameters for each part and
section in the custom style.
I Saving Styles to Disk
Page 5 of the CUSTOM STYLE display lets you save custom styles
on a disk. You can save custom styles individually, or in a complete set of
up to four styles.
After inserting a properly formatted disk (page 111) in the Clavinova's
disk drive, use the
style you want to save to disk, or select
to four custom styles. When this is done, press the
start saving the data to disk. At this point the SAVE display appears.
Enter a name for the style file. The procedure for entering the
filename is the same as that used to enter a name for a custom style (page
140). Press
same name already exists, the "
sage will be displayed. Press
to abort the save operation.
82
CVP-202
(or ) function displayed above the rightmost
is selected, the
range is from to
is selected, the
(full left) to (center) to
...................................................................................
M and L buttons to select the custom
when the name has been entered. If a file with the
to overwrite the existing file, or
setting is fixed at
(this value is relative to
or
can be set in a range from
function can be set in a
(full right).
to save a complete set of up
LCD button to
" mes-
• The reverb type used for the custom
style are determined by the style that
was selected as the basis for custom
style creation.
• Normally the VALUE and chorus TYPE
settings from the preset style are ini-
tially selected. If the PART function is
set to ALL, the preset values for part
R1 are displayed. If the SECTION
function is set to ALL, the preset val-
ues for MAIN A are displayed.
• The word "OTHERS" may appear as
the chorus type if the preset style uses
a chorus type other than those in the
list. The OTHERS setting cannot be re-
selected once you select a different
chorus type.