Yamaha Clavinova CVP-202 Owner's Manual page 102

Song Playback
I Phrase Repeat
When playing back Yamaha software that includes special phrase
marks, such as DOC files, you can select specific phrase numbers (as
indicated on the accompanying sheet music) and repeatedly practice only
the selected phrase. (Phrase Repeat can be used for the four songs for
which notation is provided in the included Music Book.)
If you select PHRASE by using the REPEAT MODE M or L buttons,
the PHRASE display for selection of the phrase number will appear at
the right of the button. Press PHRASE M or L to highlight the corre-
sponding function in the display, then select the phrase number by using
the data dial or [–] and [+] buttons.
You can also select the phrase number by pressing PHRASE M or L.
Once song playback is started, the selected phrase will be played back
repeatedly until playback is stopped.
I 1 Song Repeat
When 1 SONG is selected by pressing the REPEAT MODE M or L
button, any song selected and played as described above will play repeat-
edly until stopped.
I AB Repeat
This function allows you to specify any section (between point A and
point B) of a song, letting you repeatedly play back the selected section
for practice.
When AB mode is selected by the REPEAT MODE M or L buttons,
A ➔ and B will appear at the right of the buttons in the display to specify
points A and B.
102
CVP-202
......................................................................................................
......................................................................................................
.................................................................................................................
• Parts can be turned on/off even during
the performance.
• The Guide function can also be used
simultaneously with Phrase Repeat.
• When Phrase Repeat is started, a
lead-in count automatically plays
before the phrase. However, for free-
tempo songs, a lead-in count is not
available.
Lead-in count is not played.
• The specified A and B points will be
erased when a new song number or
another Repeat mode is selected.
• A lead-in count automatically plays
before the specified section A–B Re-
peat playback is started. However, for
free-tempo songs, a lead-in count is
not available.
• To specify the A point as the begin-
ning of the song, press A ➔ before
playback starts. In this case a lead-in
count is not available.
• Specifying only the A point results in
repeat playback between the A point
and the end of the song.
• The B point cannot be selected unless
an A point is selected.