Yamaha Clavinova CVP-202 Owner's Manual page 162

Data Connections
G Clavinova [HOST SELECT] switch setting
Set the Clavinova [HOST SELECT] switch properly according to the type of
connected computer.
• Macintosh: "Mac" (data transfer rate: 31,250bps, 1MHz clock)
• Windows: "PC-2" (data transfer rate: 38,400bps)
I Connecting the computer's USB port to the Clavinova via
a USB interface, such as the UX256, UX96, or UX16
Connect the computer's USB port to the USB interface (such as the UX256,
UX96, or UX16) using a USB cable. Install the driver (that came with the USB
interface) on the computer, and connect the USB interface to the Clavinova using
a serial cable or MIDI cables.
For more information, refer to the instruction manual for the USB interface.
G An example of connecting the USB interface to the Clavinova
using a serial cable
USB
computer
G An example of connecting the USB interface to the Clavinova
using MIDI cables
USB
computer
162
CVP-202
USB
USB cable
USB interface
USB
USB cable
USB interface
..................
HOST SELECT TO HOST
PC - 1
Mac
or
Standard Machintosh 8-pin system
peripheral cable
Clavinova
MIDI
IN OUT
HOST SELECT
MIDI
MIDI cables
Clavinova
If your system does not work
properly with the connections
and settings listed above, your
software may require different
settings. Check your software
operation manual and set the
[HOST SELECT] switch to the
proper data transfer rate.