Yamaha Clavinova CVP-202 Owner's Manual page 143

C Select the destination song number.
If you selected
use the data dial or [–] and [+] buttons to select a destination song
number between and
lected.)
➔ If the destination song number already contains data, the name of
the song file will appear in the middle section of the display. In this
case, the original data of the destination song number will be re-
placed by the source song data when you execute the copy opera-
tion.
V Execute the copy operation.
Press the button.
➔ The copy operation begins. If you are copying to the same disk, an
" " message is displayed. Press the
tinue or the button to cancel.
If you are copying the data to a different disk (or copying an entire
disk), a "
the number of times the disk will have to be changed. Press the
button to continue, or the
When copying data between disks, follow the instructions in the dis-
play, inserting the source and destination disks as required.
If you are using the
disk, the "
first time you insert the destination disk. Use the data dial or [–] and
[+] buttons to select a destination song number between
(Song numbers above
➾ If the destination song number already contains data, the song
name will appear in the display. In this case, the original data of
the destination song number will be replaced by the source song
data. Press the
as in step 1, press the
. (Song numbers above
( )" message appears to indicate
button to abort the operation.
function to copy a song to another
" message will appear the
cannot be selected.)
button to continue, or
button, then
cannot be se-
The copy operation cannot be executed if
the same song number is selected as
both the source song and the destination
song for the DISK1 – 1 function. In this
button to con-
case, a "Select a different number!"
message will appear.
Copying Commercial Software
• Copying of commercially available
software is strictly prohibited, except
for your personal use.
• Some commercially available software
is purposely copy-protected, and can-
not be copied using these functions.
and .
Data files (other than those made with
the CVP-202) that have been copied
once cannot be copied a second time to
another disk. Also, additional data can be
recorded only to the right-hand/left-hand
parts of the copied DOC files.
to abort.
Disk
143
CVP-202