Calling Up Registration Memory Numbers In Order-Registration Sequence - Yamaha CLP295 Owner's Manual

Recalling the Registered Panel Setups
CAUTION
Settings in the REGISTRATION
FREEZE display are automati-
cally saved to the instrument
when you exit from this dis-
play. However, if you turn the
power off without exiting
from this display, the settings
will be lost.
134 CVP-409/407 Owner's Manual
2
Press the [2 π † ]–[7 π
π π π † † †
3
Enter checkmarks for the items to be "Frozen" (i.e., to remain
unchanged), by pressing the [8 π
4
Press the [FREEZE] button on the panel to turn the Freeze function
on.
5
Press the [EXIT] button to exit from the operation display.
Calling Up Registration Memory Numbers in
Order—Registration Sequence
As convenient as the Registration Memory buttons are, there may be times during a
performance when you want to quickly switch between settings—without having
to take your hands from the keyboard. The convenient Registration Sequence func-
tion lets you call up the eight setups in any order you specify, by simply using the
TAB [ √ ][ ® ] buttons or the pedal as you play.
1
Select the desired Registration Memory bank to program a sequence
(page 132).
2
Call up the operation display.
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET →
TAB [ √ ][ ® ] REGISTRATION SEQUENCE
3
If you intend to use a pedal to switch Registration Memory settings,
specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [C] button to select the pedal for advancing through the sequence.
Use the [D] button to select the pedal for reversing through the sequence.
4
Use the [E] button to determine how Registration Sequence behaves
when reaching the end of the sequence (SEQUENCE END).
STOP .....................Pressing the TAB [ ® ] button or the "advance" pedal has
TOP .......................The sequence starts again at the beginning.
NEXT BANK...........The sequence automatically moves to the beginning of
5
Program the Sequence order.
The numbers shown at the lower part of the display correspond to the REG-
ISTRATION MEMORY [1]–[8] buttons on the panel.
Program the Sequence order from left to right.
† ] buttons to select items.
π † π π † †
† ] button.
π † π †
π †
no effect. The sequence is "stopped."
the next Registration Memory Bank in the same folder.