Loading Paper - Sharp BP-30C25 Quick Start Manual

LOADING PAPER

NAMES AND LOCATIONS OF TRAYS
The names of the trays are as follows.
(1)
(2)
(3)
(4)
Setting orientation of the print side
The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and
"Pre-Printed", set the paper in the reverse orientation.
Place with the print side facing the direction indicated below.
Tray
Trays 1 - 4
Bypass tray
BEFORE USING THE MACHINE
(1) Tray 1
(2) Tray 2 (when a 500-sheet paper feed tray is installed)
(3) Tray 3 (when a 500-sheet paper feed tray and a stand/2x500
sheet paper drawer are installed)
(4) Tray 4 (when a 500-sheet paper feed tray and a stand/2x500
sheet paper drawer are installed)
(5)
(5) Bypass tray
In normal status
Facing up
Facing down
With letter head or pre-printed paper set
Facing down
Facing up
17