Yamaha Clavinova CLP-F01 Owner's Manual page 53

2
AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the Clavinova's
speakers. Refer to the diagram below and use audio cables to make the connec-
tions.
CAUTION
When the Clavinova's AUX IN jacks are connected to an external device, first turn on
the power to the external device, then to the Clavinova. Reverse this order when you
turn the power off.
Clavinova
R L/L+R
AUX IN
phone plug
(standard)
3
TO HOST jack
This jack allows direct connection to a personal computer. (Refer to "Connecting a
personal computer" on page 54 for more information.)
4
HOST SELECT switch
This switch should be set according to the type of connected MIDI device or per-
sonal computer. (Refer to "Connecting a personal computer" on page 54 for more
information.)
5
MIDI [IN], [OUT], [THRU] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Make sure you set the HOST SELECT switch to MIDI when you use these connec-
tors.
(Refer to "About MIDI" on page 51 for more information.)
AUX IN
Tone Generator
audio cable
The Clavinova's [MASTER
VOLUME] and [BRILLIANCE]
control settings affect the input
signal from the AUX IN jacks,
but the [REVERB] and
[EFFECT] settings do not.
If you connect the Clavinova to
a monaural device, use only the
AUX IN [L/L+R] jack or AUX
OUT [L/L+R] jack.
phone plug
(standard)
AUX OUT
NOTE
NOTE
Connections
CLP-F01
53