Control Panel - Xpelair XPCDH10 Instruction Manual

Control Panel

ON/OFF
(power) button
1. Plug the unit into a correct mains socket. (Please refer to the rating label at the rear of the unit for correct
voltage/frequency.)
2. Press ON/OFF button to turn on the unit. The compressor will start to work in continuous mode.
3. To turn off the unit, press ON/OFF button again.
4. When the water tank is full, the "Full Water" indicator will light up. Remove the water tank carefully,
empty the water and replace securely ensuring snug fit.
10
FULL
Water tank "Full"
indicator
ON/OFF
Operation
indicator