Wall Mount Option; Desktop Option - Fortinet FortiGate 40F Series Quick Start Manual

Wall Mount Option

1. Mark the location of the holes using the
2. Drill holes for the anchors
3. Insert the anchors and then screw in the
4. Fasten the mounting bracket
5. Position the device and slide into place
6. Plug the provided power cable
electrical outlet or separate power source
18
mounting bracket
screws with 2mm exposed
into the rear of the unit and then into a grounded

Desktop Option

1. Place the unit on a flat, clean and stable surface
2. Ensure there is at least 1.5in of clearance
1.5in
1.5in
3. Plug the provided power cable into the rear of the unit and then into a grounded
electrical outlet or separate power source
for adequate airflow
1.5in
1.5in
19