Advertisement
Changing the fuse
1.
Isolate from the mains supply.
2.
Remove the front cover.
3.
Remove the fuse from it's housing and replace with one of the same type
(240V F3A).
4.
Refit the front cover making sure that it is securely screwed in place.
5.
Test the operation.
Self Test Fault Warning
•
If the battery has failed, the alarm will sound at one minute intervals and the yellow
indicator LED will flash. If the main lamp LED has failed, the alarm will sound every
half minute and the yellow indicator will flash at about 1 second intervals.
•
The fault alarm may be silenced using the test switch.
Manual Test Operation:
•
Press the "Test" button for 1 second: green LED will go off and a lamp test will run
briefly.
•
Press the "Test" button for 3 seconds: green LED will flash and a function test will
run for 30 second simulating a mains power failure.
Press the "Test" button for 5 seconds: green LED will flash and a battery duration
test will run for 3 hours.
•
Press the "Test" button for 10 seconds, all 3 LED indicators will flash 3 times and
the lamps and functions will be reset to normal operation.
SPECIFICATIONS
Input voltage:
Rated power:
Lamps:
Luminous flux:
Continuous emergency illumination:
Battery pack:
Recharge time:
Ambient temperature:
Over-discharge protection:
Ingress protection rating:
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Waste batteries can be returned to any waste battery recycling
Cd
point which are provided by most battery retailers. Contact your local authority for
details of battery and recycling schemes in your area.
220-240V~, 50Hz
5W
SMD2835 LEDs x 60pcs
600 lm
> 3 hours
(when the battery is fully charged)
Ni-Cd, 3.6V, 6Ah
24 hours – approx.
0 - 35°C
Yes
IP65
8
Made in China. PR2 9PP
Man Rev 1.0
Advertisement
