Download Print this page

Pro-Elec PEL00581 Manual

Non maintained twin spotlight, wall mount led emergency light

Download this manual

Model No. PEL00581

NON MAINTAINED TWIN SPOTLIGHT

WALL MOUNT LED EMERGENCY LIGHT

Page 1 Model No. PEL00581 NON MAINTAINED TWIN SPOTLIGHT WALL MOUNT LED EMERGENCY LIGHT...
Page 2: Installation
Please read these instructions carefully before starting installation and retain for future reference. The centre page test record can be removed and kept with the building fire safety records. IMPORTANT SAFETY INFORMATION RISK OF ELECTRICAL SHOCK. ALWAYS ISOLATE THE POWER AT THE MAINS BEFORE INSTALLING OR MAINTAINING THIS EMERGENCY LIGHT.
Page 3 Test Record Sheet on reverse PULL OUT...
Page 4 Installation, maintenance a Location: Installation date: Installed by: 20__ 20__ Month Test Sign Date Sign Date Short Short Short Short Short Short Short Short Short Short...
Page 5 and operation check record Installation test duration: 20__ 20__ 20__ Sign Date Sign Date Sign Date...
Page 6 Test Record Sheet on reverse PULL OUT...
Page 7: Operational Checks
Lamp Connector Indicators Circuit Board 143mm Mains 143mm Test Power button Connector Battery Fuse Connector 227mm 227mm 76mm Battery 305mm Fig 2. Internal Layout Fig 1. Dimensions OPERATIONAL CHECKS Note: This equipment must be checked regularly in compliance with local regulation and codes of practice.
Page 8 Changing the fuse Isolate from the mains supply. Remove the front cover. Remove the fuse from it’s housing and replace with one of the same type (240V F3A). Refit the front cover making sure that it is securely screwed in place. Test the operation.