Advertisement
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
The lamp is rated at IP65 for external use.
WHAT'S INCLUDED
•
Lamp assembly.
•
User manual.
INSTALLATION
•
Installation is simply embedding the spike in the ground ensuring the solar panel is
exposed for maximum charging efficiency but not in the vicinity of other strong light
source or the low light illumination may not function.
•
Turn the on/off switch under the top part to the ON position after locating.
OPERATION
•
Allow at least 8hrs for the battery to fully charge initially.
NOTE: the lamp does not light except in low ambient light levels.
•
When the ambient light falls below a preset level the LEDs will illuminate
constantly.
CLEANING & MAINTENANCE
•
Clean the unit only with a damp cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
Solar Path Spotlight
Model: PEL01351
1
Advertisement
Table of Contents
Related Manuals for Pro-Elec PEL01351
Summary of Contents for Pro-Elec PEL01351
- Page 1 Solar Path Spotlight Model: PEL01351 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • The lamp is rated at IP65 for external use. WHAT’S INCLUDED •...
- Page 2 • During periods where the lamp may not be used, it is advisable to charge the battery occasionally to maintain it’s performance and before re-using the lamp. SPECIFICATION Solar panel: Monocrystal 2V, 0.25W Battery: 1 x Ni-MH 600mAh rechargeable. LED: 1 x white FT8mm Working time: up to 10 hours.
Need help?
Do you have a question about the PEL01351 and is the answer not in the manual?
Questions and answers