Download Print this page

Pro-Elec PEL00785 Manual

Non maintained twin spotlight wall mount led emergency light

Model No. PEL00785

NON MAINTAINED TWIN SPOTLIGHT

WALL MOUNT LED EMERGENCY LIGHT

Table of Contents

Need help?

Do you have a question about the PEL00785 and is the answer not in the manual?

Page 1 Model No. PEL00785 NON MAINTAINED TWIN SPOTLIGHT WALL MOUNT LED EMERGENCY LIGHT...
Page 2 Please read these instructions carefully before starting installation and retain for future reference. The centre page test record can be removed and kept with the building fire safety records. IMPORTANT SAFETY INFORMATION RISK OF ELECTRICAL SHOCK. ALWAYS ISOLATE THE POWER AT THE MAINS BEFORE INSTALLING OR MAINTAINING THIS EMERGENCY LIGHT.
Page 3 Test Record Sheet on reverse PULL OUT...
Page 4 Installation, maintenance a Location: Installation date: Installed by: 20__ 20__ Month Test Sign Date Sign Date Short Short Short Short Short Short Short Short Short Short...
Page 5 and operation check record Installation test duration: 20__ 20__ 20__ Sign Date Sign Date Sign Date...
Page 6 Test Record Sheet on reverse PULL OUT...
Page 7 OPERATIONAL CHECKS Note: This equipment must be checked regularly in compliance with local regulation and codes of practice. For your own safety, testing should occur during the day. • After installation, you should allow 24 hours for the battery pack to charge fully before testing.
Page 8 Changing the battery • If after a routine operation check, the lamp does not remain lit for the 3 hour period, a new battery pack may be required. Change the battery pack as follows: Isolate from the mains supply and remove the front panel. Unplug the battery pack connector from the PCB.