Yamaha CBX-K2 Owner's Manual page 25

Sending a Simple Command with L
11
C ç
Operation: +
Relevant Function: TG300B Reset
Example:
Sending the current CBX-K2 settings to a MIDI storage
device or sequencer with the Bulk Dump Out function
C ç ™
+
Setting a Specific Value for a Function
C ç
Operation: +
12 L
Relevant Functions: Song Select; Voice Map; Device
Number; Touch Sensitivity; Data Density (Wheel); PB
Density; Data Density (Slider); Measure Number
Example:
Changing the touch sensitivity of the CBX-K2 to 10
C ç ˙
+
K
Setting a Specific Value for a Specific
Controller
C ç
Operation: +
Controller Number
13
Relevant Functions: RPN Direct Data Send*; Controller
Direct Data Send; NRPN Direct Data Send*
Functions marked with an asterisk (*) above require
that you enter two values: an MSB (Most Significant
Byte) and an LSB (Least Significant Byte). (See on
page 21 and operation
Example:
Changing the Portamento Time of the tone generator's voice
to 25.
C ç S
+
K 2 5
{
The operation steps enclosed in braces ({}) can be repeated
or re-entered as long as C is held.
NOTE
This operation transmits a value for the
specified controller number WITHOUT altering the
current controller assignment for the Assignable Wheel
or Assignable Slider.
L
Function Key
L
Function Key Value
1 0
Function Key
L L
{Value(s) }
, page 23.)
5
(Portamento Time)
K
}
NOTE
Decimal values of MSB and LSB are 3 digits
each (6 digits total); hexadecimal values are 2 digits
each. Zeroes must be entered, unless they occur at the
beginning of the value. For an example of MSB = 012,
LSB = 034 above, the first zero may be omitted, but the
second must be entered. In other words, the value
could be entered as 1
4 K.
Sending a Single-Byte Data Message
This function allows you to quickly and easily
send a non-standard MIDI message of a single
byte. The effective range of this function is from
14
0–255; values outside of this range will be
ignored.
C ç
Operation: +
Example:
Sending a (decimal) value of 252
C ç 2
+ {
The operation steps enclosed in braces ({}) can be repeated
or re-entered as long as C is held.
Setting the Functions
2 0 3
L
{Value }
5 2 K
}
25