Settings
PREPARATIONS PRIOR TO SETTING
A
4
SETTING THE CALENDAR DISPLAYS
A
4
1
D
5
SETTING THE MOON PHASE
3
7
6
2
B
C
Before performing any corrections or settings, always wind the
•
watch (20 turns of the winding crown).
pull the crown out (7).
•
advance the hands clockwise until the date display (4)
•
advances by one day.
set the hands to 7 am.
•
push the winding crown home again (6).
•
A
actuate push piece (
) until the date hand (4) points to the 1.
•
B
actuate push piece (
) as many times as needed to display
•
the current year (1) (2014 = II, 2015 = III, 2016 = leap year IV)
and then the month (2).
A
actuate push piece (
) as many times as needed to display the
•
current date (4).
D
actuate push piece (
) as many times as needed to display
•
the correct day of week in aperture (5).
actuate correction push piece (
•
full moon.
consult the "full Moon calendar" and determine how many
•
days have elapsed since the last full moon. for each elapsed
day (not counting the full-moon day), actuate correction push
piece (c) once to set the moon phase display.
C
) until lunar disk (3) indicates