Settings
PREPARATIONS PRIOR TO SETTING
A
SETTING THE CALENDAR DISPLAYS
A
5
1
D
SETTING THE MOON PHASE
4
3
7
6
2
3
B
C
• before performing any corrections or settings, always
wind the watch (20 turns of the winding crown).
• pull the crown out (7).
• advance the hands clockwise until the date display (3)
advances by one day.
• Set the hands to 6 am.
• push the winding crown home again (6).
• actuate push piece (A) until the date hand (3)
points to the 1.
• actuate push piece (B) as many times as needed to
display the current year (1) (2014 = II ; 2015 = III ; 2016 =
leap year IV) and then the month (2) with push piece (B)
• actuate push piece (A) as many times as needed to
display the current date (3)
• actuate push piece (D) as many times as needed to
display the correct day of week in aperture (5)
• Actuate push piece (C) as many times as needed until the
moon phase hand (4) points to the golden-plated full
moon symbol.
• consult the "full Moon and leap Year calendar"
brochure to find out how many days have elapsed
since the last full moon and actuate the correction push
piece (C) that many times as the number of days
(without the day of the last full moon).