Rubbermaid Dovetail Drawer Series Quick Start Manual

Please check that you have all parts before beginning and follow the instructions carefully.
Description
Decorative Drawer Front (sold separately)
Dovetail Drawer Box
Undermount Glide Set (Left & Right)
Drawer Lock Clip (Right)
Drawer Lock Clip (Left)
Door Bumper Set of 4
Adjusters
STEP 1
Attach (1) Drawer Lock Clip Right (D) and Drawer Lock Clip Left (E) to
underside of Dovetail Drawer Box (B) using (4) Screw, #6 x 5/8" Wood
Screws (L). Note: Attach clips to forward most corners and screw
into front of drawer box using clip's hole locations. Adjust clips as
needed.
B
E
F R
L
STEP 3
Pound adjusters into back of drawer face panel.
G
A
14" & 19" Depth
Dovetail Drawer Kits
Tools Required
Letter
A
B
C
D
E
F
G
F R
O
E
N
T
D
B
O
N
T
Angle teeth
this direction.
OR
Description
Qty
Handle with Screws (sold separately)
1
Screw, #7 x ½" Wood Screw
1
Screw, 6mm x 10mm Euro Screw
1
Screw, #8 - 32 x 7/8" Notched Machine Screw
1
Screw, #6 x 5/8" Wood Screw
1
Screw, #8 x 1" Wood Screw
1
2
STEP 2
Attach the Drawer Glides (C) to the Vertical Panels with (4) Euro
Screws (J) for the 14" Drawer Kits. For the 19" Drawer Kits attached
with (6) Euro Screws (J). Add (2) additional screws, #7 x ½" Wood
Screw, (I) in glide location shown. Note: Extending the glides aids in
accessing the hole locations.
FRONT
Note: Mounting Hole Location for #7 x ½"
Wood Screw (N). This hole is not
pre-drilled in melamine.
STEP 4
Place drawer face
panel flat onto
solid surface.
Drill through
the desired
Pilot Holes.
G
2101798
Rubbermaid Incorporated,
Huntersville, NC 28078-1801
U.S.A. 1-888-895-2110
Canada 1-866-595-0525
www.rubbermaid.com
C C
J
BACK BACK
Mounting Hole Locations. Note: 19" Drawer
Kits requires a third mounting location.
A
H A
N D
L E
K N
O B
NOTE: Drill bit size recommended is #9 drill bit.
Letter Qty
H
1
I
2
J
6
K
2
L
4
M
2
FRONT