Page 2
STEP 1 STEP 2 Parts Required Parts Required • Left Vertical Panel (1) • Top Panel (1) • Right Vertical Panel (1) • Confirmat Screws (4) • Hinge Plates (4) • Screw Covers (4) • Euro Screws (8) Bottom Finished edge down all sides Choose Your Installation Method, Upright Mount or Floor Mount STEP 3A STEP 3B Upright Mount Instructions Floor Mount Instructions Parts Required...
Page 3
Measurements STEP 6 Upright Mounting Instructions Rail mounting requires a minimum height of 39.25" for base cabinets. Center to center measurement between rails is 30-3/16". Attach rail to wall per instructions provided with rail. (Dimensions to top of rail) 30-3/16" Important: One upright must be attached to stud. 39.25" If two cabinets share an upright it must be attached to stud.
Page 4
Horizontal Vertical STEP 13 STEP 14 Floor Mounting Adjusting Feet Ensure cabinet is square prior to adjusting hinges. Vertical HORIZONTAL ADJUSTMENT VERTICAL ADJUSTMENT Place cabinet in desired location against wall. Level cabinet using adjustable feet. Horizontal Adjusts gap size For doors not flush between doors.
Need help?
Do you have a question about the FastTrack 5M13 and is the answer not in the manual?
Questions and answers