Final Transmission Oil - Yamaha YJ125T Owner's Manual

ZAUM00**
1. Headlight coupler
2. Bulb cover
2. Disconnect the headlight coupler,
and then remove the bulb cover.
ZAUM00**
1. Bulb holder
3. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the defective bulb.
PERIODIC MAINTENANCE AND MINOR REPAIR
w
Headlight bulbs get very hot. There-
1
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
2
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
cC
Do not touch the glass part of the
headlight bulb to keep it free from oil,
otherwise the transparency of the
glass, the luminosity of the bulb, and
the bulb life will be adversely affected.
1
Thoroughly clean off any dirt and fin-
gerprints on the headlight bulb us-
ing a cloth moistened with alcohol
or thinner.
5. Install the headlight bulb cover, and
then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EWA10790

Final transmission oil

The final transmission case must be
checked for oil leakage before each ride.
If any leakage is found, have a Yamaha
dealer check and repair the scooter. In
addition, the final transmission oil must
be changed as follows at the intervals
specified in the periodic maintenance
and lubrication chart.
1. Start the engine, warm it up by
ECA10660
2. Place the scooter on the
3. Place an oil pan under the final
ZAUM00**
1. Final transmission oil filler cap
6-17
riding the scooter for several min-
utes, and then stop the engine.
centerstand.
transmission case to collect the
used oil.
EAU20060
1
2
3
4
5
6
7
1
8
9