Titling - Yamaha MDX-E100 Owner's Manual

This function lets you title recorded MDs and the
individual tracks. Titles may consist of uppercase and
lowercase letters, numbers, and symbols for a maximum
of up to 250 characters for each title.
TITLE DELETE
2,6
CANCEL
CHAR NUMBER
3A
A B C D E F
1 2
M N O P Q R
3A,3B
5 6
Y Z /
9 0
!
1,3C
REC/
PAUSE
M-MARK MONO/ST INPUT
RANDOM PROGRAM
POWER
1
To title a disc
Press & to stop playback.
To title a track
1 Press & to stop playback.
2 Use $ or › to select the track you want to title.
You can also title during playback, pause, or
recording. However, UNDO is not possible in these
cases.
2
Press TITLE to activate the title mode.
The cursor appears in the display.
3
A) To enter letters of the alphabet
1 Press CHAR repeatedly to select between uppercase
letters (A, B, C...) and lowercase letters (a, b, c...).
2 Use the numbers [characters] buttons to select a letter.
B) To enter numbers
1 Press NUMBER.
2 Use the numbers [characters] buttons to select a
number.
C) To enter symbols (! # $ % &...)
Use $ or › to select a symbol. Symbols are between
numbers and uppercase letters in the character set.

TITLING

DELETE/
CANCEL
EDIT
SET
ENTER EDIT
4
G H I J K L
3B
3 4
S T U V W X
7 8
SPACE
+10 +100
+10 [SPACE]
⁄
1,3C
SYNC
1
REPEAT
A-B S/F
DISPLAY SCROLL
Example:
• Having pressed CHAR in step 3:
Press 1 [ABC] once to select "A".
Press 1 [ABC] twice to select "B".
• Having pressed NUMBER in step 3:
Press 1 [ABC] to select "1".
• To search symbols quickly:
Having pressed CHAR and 1 [ABC] to select
uppercase "A", press $ to search symbols from the
end.
Also, you can use $ or › repeatedly to scroll through
the entire character set.
4
Press SET/ENTER to enter the character.
Note
When a number is selected using a number button in step
3, it is not necessary to press SET/ENTER.
5
Repeat steps 3 and 4 to complete your title.
To delete a character (ABCD = ABD)
1 Use ! or ⁄ to move the cursor to the position of
the character you want to delete.
2 Press DELETE/CANCEL.
To insert a character (ABCD = ABTCD)
1 Use ! or ⁄ to move the cursor to the position
where you want to insert the character.
2 Use CHAR or character buttons to select the new
character.
3 Press SET/ENTER to set the character. The character
previously in that position automatically moves to the
right.
To insert a space (ABCD = AB CD)
1 Use ! or ⁄ to move the cursor to the position
where you want to insert the space.
2 Press +10 [SPACE] on the remote.
To cancel titling
Press &.
6
Press TITLE to exit the title mode.
If a title consists of more than 12 characters, it will scroll
across the display once and then be displayed in
abbreviated form (first 12 characters only).
To undo TITLE
1 Press & to display the total tracks and total playing
time on the disc.
2 Press EDIT repeatedly to display "Undo Title", then
press SET/ENTER.
"Undo OK ?" appears in the display.
3 Press SET/ENTER again to undo.
7
If the TOC indicator is lit, perform the TOC
WRITE function.
To perform the TOC WRITE function
1 Follow the procedure of "TOC WRITE" on page 18.
2 Press
on the front panel. (The MD recorder
automatically performs the TOC WRITE function.)
E-19