Keys; Function Keys; Preparing The Machine; Programme Selection - Euromaid EDWB16S User Manual

60cm 16 place freestanding dishwasher
Table of Contents

Advertisement

Operat ng the product

Keys

On/Off Key
It is used to switch on or off the machine.
When switching on, the machine turns on in
"Eco" programme. In the Off mode, indicators
on the display will turn off.
If the Half Load and Time Delay functions
were selected in the previous programme
used, these functions will remain active
when the machine is turned off and on
again. If you want to disable these functions
after turning the machine off and on again,
you must press the relevant keys again.
Start/Pause/Cancel key
It is used to start, pause or cancel the
selected programme or function.
After switching on your machine with the
On/Off key, wait for 2 seconds to press the
Start/Pause/Cancel key. An image will be
displayed within this time.
Programme Selection key
It is used to choose the washing programme
you selected in the "Programme and
consumption table".

Function Keys

If you press any of the Function keys during
programme selection or time delay selection,
an affirmative key indicator will be displayed
if the relevant function is supported by the
selected programme.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears. You can press and hold
the function key for 3 seconds to enable or
disable the tablet function.
Dishwasher / User's Manual

Preparing the machine

1.
Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.
5. Check if the Salt and Rinse Aid indicators
light and add salt and/or rinse aid if
needed.
6. Close the door of the dishwasher.

Programme selection

1.
Press the On/Off button to switch on
your machine.
2. Refer to the "Programme and
consumption table" to select a washing
programme suitable for your dishes.
3. Press the Programme Selection key
repeatedly until the number of the
programme you selected appears on the
Programme indicator. The programme
number will increase by one each time
you press the key.
27 / 48 EN

Advertisement

Table of Contents
loading

Table of Contents